Filter By:
- Parts & Accessories (17)
- Wheels (9)
- Spokes (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels

$4.99
Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

$19.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install

$14.99
- Replacement rear wheel skewer.
- Specifically designed for use with Saris trainers.
- Can be used for both indoor and outdoor rides.

$14.99
Designed to protect your hub and spokes on grinds! The Mission front hub guard fits on most front hubs. Constructed from 100% heat-treated chromoly, this guard is guaranteed to hold up to a long life of grinds on all surfaces!
Product Specifications
- Material: Heat Treated Chromoly
- Axle Size: 3/8" (10mm)
- Compatibility: Most Front Hubs
- Weight: 2oz

$11.99
Designed to fit most rear hubs, sliding over the existing hardware on the non-drive side. Constructed from 100% heat-treated chromoly, the Mission Guard is guaranteed to hold up to a long life of grinds on all surfaces!
Product Specifications
- Material: Heat Treated Chromoly
- Axle Size: 14mm
- Compatibility: Most rear hubs
- Weight: 4.0oz

$169.99
The Kink East-Coaster DTC wheel features the East-Coaster DTC rear freecoaster hub and is laced up to the Kink Atlas II rim. This 36-hole wheel is hand-laced, then tightened and trued to specifications. Its 3x lacing pattern, 14-gauge spokes, and brass nipples provide massive strength to stand up to plenty of riding abuse. All Kink wheels are wrapped with a Kink rim strip to provide excellent protection between the rim and tube. The East-Coaster hub uses a male axle with 17mm nuts.

$43.90 - $68.00
- Straight gauge 2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads
- 222g @ 32h/265mm
- Box of 100
- Nipples sold separately

$15.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.

$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

$57.99 - $62.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 24-inch
- ISO Diameter: 507 / 24-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$60.99 - $65.49
Sta Tru Rear Wheels
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 24-inch
- Cassette Body Type: Threaded Standard 1.37-inch x 24tpi
- ISO Diameter: 507 / 24-inch BMX
- Tire Type: Clincher
- Rear Axle: 3/8-inch Threaded x 135mm

$76.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- ISO Diameter: 622 / road / 29"
- Front Axle: QR x 100mm
- Tire Type: Clincher

$1,155.00
Whether you're staring down an enduro race day or in the midst of an epic ride with your buddies, Giant's P-TRX0 carbon trail wheels are here to crush it all. 27mm-wide carbon rims are light, tough, and give your tires a wide, ground-hugging stance. They're tubeless compatible, so you can charge hard with enhanced traction and increased flat resistance. Aluminum hub shells are equipped with renowned DT Swiss internals for smooth spinning and ultra fast engagement. DT Swiss Aerolite bladed spokes and ProLock nipples tie them together. This wheel is SRAM XX1 compatible with an optional XD driver (sold separately).

$475.00
Giant's P-TRX1 29er Front Wheel is a light, durable aluminum wheel that's ready to hit the trails. This hoop is tubeless-compatible with the supplied tape and valve, and is laced to Giant's aluminum hub shell—which encases DT Swiss internals—for miles of smooth, efficient rolling. The rim is also 28mm-wide for great performance with wide tires.

$575.00
Giant's P-TRX1 29er Rear Wheel is a light, durable aluminum wheel that's ready to hit the trails. This hoop is tubeless-compatible with the supplied tape and valve, and is laced to Giant's aluminum shell for miles of smooth, efficient rolling. And with DT Swiss' patented star ratchet system, you'll get superior engagement. The rim is also 28mm-wide for great performance with wide tires.

$1,155.00
Turn your XC bike into an XC rocket with Giant's light, stiff P-XCR0 27.5-inch Composite wheels. The go-fast magic comes from the wheel's 25mm-wide carbon, tubeless-ready rim — it's more than ready to slay your favorite trails. Giant supplies the aluminum hub shells, and DT Swiss provides their renowned star rachet internals, as well as their Aerolite bladed stainless steel spokes, and aluminum nipples for unparalleled ride quality, strength, and speed.

$295.00
Giant's P-XCR1 29er Front Wheel is a lightweight aluminum wheel ready to hit the trails. Tubeless-compatible with the supplied rim strip and valve, this 28-spoke hoop is laced to a Giant hub shell with DT Swiss internals for miles of smooth, efficient rolling.

$6.00
- Strong nylon reinforced PVC for a secure fit
- Handles high-pressures; does not rot
- 0.5mm thick

$12.00
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick

$10.00
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick
Page 1 of 1