SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16

Connect your PC to CycleOps VirtualTraining.

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

GNT Alloy GPS Mount for TT Bar Black Product description - Time Trial GPS mount - Alloy construction - Giant & Garmin computer trays included - 22.2mm / 24mm handlebar compatibility

GNT Alloy Out-Front GPS & GoPro Mount for Round Bar Black - Team edition GPS extension mount - Alloy construction - Giant & Garmin GPS compatible using supplied trays - GoPro accessory compatible - 31.8mm round handlebar clamp

GNT Axact 13W Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

GNT Axact 13W Replacement Mounting Bracket Product description - Includes mounting bracket and zip ties

GNT Axact 14W Wireless Speed Sensor Product description - Replacement wireless speed sensor for Axact 14W computers

GNT Axact 6 Wired Mount Kit w/ Speed Sensor & Magnet Product description - Kit includes mount, sensor and magnet

GNT Axact 9/11 Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

GNT Axact 9/11 Replacement Mounting Bracket Product description - Includes mounting bracket and zip ties

GNT Axact 9W/13W Wireless Mount Kit w/ Speed Sensor & Magnet Product description - Kit includes mount, sensor and magnet

GNT Axact Cadence Magnet Product description - Wheel magnet compatible with round and bladed spokes - Cadence magnet includes zip ties

GNT Axact Pro Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

GNT Axact Pro+ Mounting Kit Product description - Includes sensors, mounting bracket, shims, magnet, and zip ties

GNT Axact Pro+/Pro Mounting Bracket Product description - Includes mounting bracket and zip ties

GNT Axact Wireless Speed Transmitter Product description - Includes wireless sensor and zip ties

GNT CR2025 Lithium Computer Battery - Sold individually

GNT Computer Extension Mount GoPro Attachment Bracket Product description - Giant computer extension mount GoPro attachment - Nylon construction - Hardware included - Fits the following GPS mounts: 2018+ Propel Computer Mount 2018+ Alloy Out-Front GPS & GoPro Mount for Round Bar Nylon Out-Front GPS Mount For Round Bar

- Conduct accessory mounts allow clean integration of handlebar accessories with the Conduct Brake System - Will fit all GoPro and Garmin models (Including 1000) Kit includes: - Universal light adapter (x1) - GoPro mount adapter (x1) - Computer mount adapter (x1) - Giant computer mount tray (x1) - Garmin computer mount tray (x1) - Computer mount disc plate (x2) - Stem bolts and washers

• Handlebar computer/GPS mount designed for use with Contact SLR Aero integrated handlebars (sold separately) • Mounts to underside of handlebars • Integrated Di2 front junction box mount for clean cable routing

Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included

Combine with Giant's Computer / GoPro Combo Mount and fit your Garmin and GoPro to any Giant round or SLR Aero handlebar.

GNT MTB Mount With Giant & Garmin Tray - CNC machined aluminum material is solid and durable - Puts your computer in an easily accessible and clearly visible but fully protected position - Compatible with Giant or Garmin computers and GoPro mounts. - Fits 31.8mm and 35mm handlebars

Includes: - Direct handlebar/stem mount - Extended handlebar mount

GNT Nylon Out-Front GPS Mount For Round Bar Black - Giant NeosTrack / Neos GPS computer mount - Durable Nylon construction - Giant GPS puck included - Fits 31.8mm and 35mm handlebars